CANOGA PERKINS CanogaOS Command Reference - Manual (Page 476)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 476 of 855
25.17 disable-ldp
Use this command to disable LDP on a specified interface.
Note:
This command disables the transmission of Hello packets through the current
interface, and clears all created sessions and adjacencies for this interface.
Command Syntax
disable-ldp
Syntax Description
This command has no arguments or keywords.
Command Mode
Interface mode
Defaults
This command has no default settings.
Examples
In the following example, the disable-ldp command is used to disable LDP on a specified interface:
Switch # configure terminal
Switch (config)# interface eth0
Switch (config-if)# disable-ldp
Related Commands