13 configure the cfm linktrace cache – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 196
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 196 of 855
Privileged Exec mode
Default
The default TTL is 64.
The default timeout is 10 seconds.
Usage
1
)This command is used to transmit a loopback message for a MAC address to a remote
MEP for Path discovery.
2
)This command is used to transmit a loopback message to a remote MEP for Path
discovery.
Examples
Switch#
linktrace ethernet mep 88 level 7 vlan 30 ttl 64 timeout 5
Switch#
linktrace ethernet 3456.0908.0908 level 7 vlan 30 ttl 64 timeout 5
Related Commands
10.13 Configure the CFM linktrace cache
Use the command to configure the CFM linktrace cache. You can set a maximum cache size or hold time.
Command Syntax
ethernet cfm linktrace cache
no ethernet cfm linktrace cache
ethernet cfm linktrace cache size ENTRIES
no ethernet cfm linktrace cache size
ethernet cfm linktrace cache hold-time minutes
Command Mode
Configure mode
Default
The default is disable
The default is 100;
Usage