34 show ldp – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 493
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 493 of 855
25.34 show ldp
Use this command to display basic LDP attributes defined for the current LSR.
Command Syntax
show ldp
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Examples
The following is a sample output from the show ldp command displaying basic LDP attributes.
Switch # show ldp
Router ID : 10.10.0.11
LDP Version : 1
Global Merge Capability : N/A
Label Advertisement Mode : Downstream Unsolicited
Label Retention Mode : Liberal
Label Control Mode : Independent
Loop Detection : Off
Loop Detection Count : 0
Request Retry : Off
Propagate Release : Disabled
Hello Interval : 5
Targeted Hello Interval : 15
Hold time : 15
Targeted Hold time : 45
Keepalive Interval : 10
Keepalive Timeout : 30
Request retry Timeout : 5
Targeted Hello Receipt : Disabled
Transport Address : N/A
Transport Interface : N/A
Import BGP routes : No
Related Commands