23 keepalive-timeout – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 482
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 482 of 855
25.23 keepalive-timeout
Use this command to set the global value for the time-out after which sessions are rejected. Use the
no parameter to revert to default keep-alive time-out.
Command Syntax
(no) keepalive-timeout
number
Syntax Description
number
Specifies the time-out value in seconds, the range is 30 to
65535
Command Mode
Router mode
Defaults
The default is 30 seconds.
Examples
In the following example, the
keepalive-timeout
command is used to set the global value for the
time-out after which sessions are rejected:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# keepalive-timeout 635
Related Commands
configure terminal
show startup-config