14 debug ldp qos – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 473
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 473 of 855
25.14 debug ldp qos
Use this command to write Quality of Service information to the output.
Note:
On using a debug command, the router continues to generate an output until the
no parameter is used with the command. The debug output and system error
messages are written on the virtual terminal. Use the log file or log syslog
command in configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp qos
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp qos command is used to write Quality of Service
information to the output:
Switch# debug ldp qos
Related Commands
debug ldp fsm
debug ldp packet