CANOGA PERKINS CanogaOS Command Reference - Manual (Page 523)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 523 of 855
26.6 no mpls lsp-tunneling
Use this command to remove one ILM from using a tunnel.
Command Syntax
no mpls lsp-tunneling INLABEL
Syntax Description
INLABEL Incoming label, the range is 16 to 1048575.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls lsp-tunneling command is used to remove one ILM from
using a tunnel:
Switch# configure terminal
Switch(config)# no mpls lsp-tunneling 100
Related Commands
mpls lsp-tunneling