CANOGA PERKINS CanogaOS Command Reference - Manual (Page 828)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 828 of 855
After three resolving name servers have been specified, additional resolving name servers cannot be
specified unless an existing entry is removed.
Examples
The following example shows how to specify the DNS server list:
Switch(config)# dns server 10.10.1.1
Switch(config)# dns server 20.20.2.2
Related Commands
show dns
43.4 show dns
To display configuration information about a Domain Name System (DNS) view, use the show dns
command in privileged EXEC mode.
Command Syntax
show dns {domain | server}
domain Display DNS domain list.
server Display DNS server list.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dns command:
Switch# show dns domain
Current DNS domain configuration:
Domain Suffix
--------------------------------------------------------------
1 domain domain.com
2 domain aa.com
Related Commands
43.5 show ip host
To display configuration information about a Domain Name System (DNS) view, use the show dns