9 show lacp neighbor – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 97
Advertising
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 97 of 855
Related Commands
None
5.9 show lacp neighbor
Use this command to display neighbor information of all of the channel groups, or a specified channel
group.
Command Syntax
show lacp [channel-group-number] neighbor
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None
Examples
This example shows how to display neighbor information of all of the channel groups:
Switch# show lacp neighbor
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 1 neighbors
Partner's information:
Advertising