CANOGA PERKINS CanogaOS Command Reference - Manual (Page 440)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 440 of 855
24.4 ip pim bsr-border
Use this command to configure the border of pim domain.
To remove the configurations of the border of pim domain, use the no form of this command.
Command Syntax
ip pim bsr-border
no ip pim bsr-border
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure the border of pim domain.
Switch(config)#ip pim bsr-border
This example shows how to remove the configurations of the border of pim domain.
Switch(config)#no ip pim bsr-border
Related Commands
ip pim bsr-candidate
24.5 ip pim dr-priority
Use this command to set the pim router DR priority.
To unset the priority, use the no form of this command.
Command Syntax
ip pim dr-priority priority
no ip pim dr-priority
priority :<0-1048576> the DR priority
Command Mode
Interface configuration
Defaults
1
Usage
When a hello message without DR priority is received, it will be regarded to have the max DR priority