14 no mpls-vpls – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 608
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 608 of 855
30.14 no mpls-vpls
Use this command to unbind an interface to a VPLS instance.
Command Syntax
no mpls-vpls NAME [vlan VLANID]
Syntax description
NAME
Identifying string for VPLS instance
VLANID
Vlan identifier, the range should be from 1 to 4094.
Command Mode
Interface mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls-vpls command is used to unbind an interface to a VPLS
instance:
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# no mpls-vpls vpls1
Related Commands
mpls-vpls
Advertising