14 show vlan classifier rule, 15 switchport access allowed – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 125
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 125 of 855
None
Examples
This example shows how to display information about vlan classifier group 1 on interface:
Switch# show vlan classifier interface group 1
Related Commands
show vlan classifier group
show vlan classifier rule
6.14 show vlan classifier rule
Use this command to show the information about vlan classifier rule.
Command Syntax
show vlan classifier rule [rule]
rule: <0-255> the id of vlan classifier rule
Command Mode
EXEC
Usage
None
Examples
This example shows how to display information about all the vlan classifier rules:
Switch# show vlan classifier rule
This example shows how to display information about the vlan classifier rule1:
Switch# show vlan classifier rule 1
Related Commands
show vlan classifier group
show vlan classifier interface
6.15 switchport access allowed
Use this command to allow or not allow the traffic from the specific vlan to pass the access port.
Command Syntax
switchport access allowed vlan {add
|remove} vlan