CANOGA PERKINS CanogaOS Command Reference User Manual
Page 614
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 614 of 855
Examples
In the following example, the ping mpls ipv4 command is used to initiate checking MPLS host
reachability and network connectivity by specifying the destination type as a Label Distribution
Protocol (LDP) IPv4 address.
Switch# ping mpls ipv4 1.1.1.1/24 destination 127.0.0.1 dsmap detail flags interval
100 repeat 100 reply-mode 1 source 1.1.1.1 timeout 100 ttl 200
Related Commands
traceroute mpls ipv4
Advertising