6 no vpls-description – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 600
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 600 of 855
30.6 no vpls-description
Use this command to remove characters describing about the VPLS instance.
Command Syntax
no vpls-description
Syntax Description
This command has no arguments or keywords.
Command Mode
VPLS mode
Examples
In the following example, the no vpls-description command is used to remove characters
describing about the VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)# no vpls-description
Related Commands
vpls-description
Advertising