48 targeted-peer-hello-interval – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 513
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 513 of 855
25.48 targeted-peer-hello-interval
Use this command to set the interval for sending unicast hello packets to targeted peers. Use the
no parameter with this command to revert to the default targeted-peer hello-interval value.
Command Syntax
(no) targeted-peer-hello-interval
number
Syntax description
number
Specifies the interval in seconds, the range is 1 to 21845.
Command Mode
Router mode
Defaults
The default is 15 seconds.
Examples
In the following example, the targeted-peer-hello-interval command is used to set the interval for
sending unicast hello packets to targeted peers:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# targeted-peer-hello-interval 100
Related Commands
show ldp
targeted-peer-hello-interval