77 clear line vty, 78 re-username – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 802
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 802 of 855
9 ip ssh server enable
10 end
Related Commands
show logging
40.77 clear line vty
To clear a specified line session, use the clear line vty command in privileged EXEC mode.
Command Syntax
clear line vty first [last]
first
The first vty number, the range is 0 to 7.
last
The last vty number, the range is 0 to 7.
Command Mode
Privileged EXEC
Usage
You can specify only the first vty number to clear a specific vty session, or you can specify the last vty
number at the same time to clear a range of vty sessions.
Examples
The following is sample output from the clear line vty command.
Switch# clear line vty 0 7
[OK]
Related Commands
40.78 re-username
To change the username that has been created in local database, use the re-username command in
global configuration mode.
Command Syntax
re-username oldname newname newname
oldname
The original username.
newname The
new
username.
Command Mode
Global configuration