CANOGA PERKINS CanogaOS Command Reference - Manual (Page 534)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 534 of 855
IFNAME The name of the interface, the format follows below:
eth-0-1, agg1, vlan1, etc.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls interface command is used to display interfaces bound
to MPLS interface:
Switch# show mpls interface eth-0-9
Interface eth-0-9
Label switching is enabled with label-space 0
minimum label value configured is 16
maximum label value configured is 16384
In-labels used:0, Out-labels used:0
Related Commands
26.18 show mpls lsp-tunneling
Use this command to display MPLS LSP-Tunneling.
Comm a nd Syntax
show mpls lsp-tunneling
Syntax description
This command has no arguments or settings.
Command Mode