CANOGA PERKINS CanogaOS Command Reference - Manual (Page 770)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 770 of 855
Command Syntax
show ntp statistics
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ntp statistics command:
Switch# show ntp statistics
Current NTP I/O statistics:
============================================================
time since reset: 175834
receive buffers: 10
free receive buffers: 9
used receive buffers: 0
low water refills: 1
dropped packets: 0
ignored packets: 0
received packets: 32
packets sent: 31
packets not sent: 0
interrupts handled: 32
received by int: 32
Related Commands
show ntp association
show ntp status
40.39 show processes cpu sorted
To display CPU utilization information about the active processes sorted by percentage in a device, use
the show processes cpu sorted command in privileged EXEC mode.
Command Syntax
show process spu sorted
Command Mode
Privileged EXEC