CANOGA PERKINS CanogaOS Command Reference - Manual (Page 418)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 418 of 855
Usage
None
Examples
This example shows how to enable ip multicast routing.
Switch(config)# ip multicast-routing
This example shows how to disable ip multicast routing.
Switch(config)# no ip multicast-routing
Related Commands
None
21.15 show ip igmp groups
Use this command to show the information about igmp groups.
Command Syntax
show ip igmp groups [ip_address |interface interface |detail]
ip_address: the ip address of the igmp group specified
interface: the name of the interface specified
detail: for detail
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the information about igmp groups.
Switch# show ip igmp groups detail
Related Commands
ip igmp access-group
ip igmp immediate-leave group-list
21.16 show ip igmp interface
Use this command to show the information about igmp on interface.
Command Syntax