4 match interface – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 372
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 372 of 855
19.3.1.6 Related Commands
match ip address
match as-path
set as-path
set community
match metric
19.4 match interface
Use this command to define the interface match criterion.
Use the no parameter with this command to remove the specified match criterion.
.
The match interface command specifies the next-hop interface name of a route to be matched.
Note:
This command is valid only for RIP, OSPF.
19.4.1.1 Command Syntax
match interface IFNAME
no match interface
19.4.1.2 Syntax Description
IFNAME
A string that specifies the interface for matching.
19.4.1.3 Command Mode
Route-map mode
19.4.1.4 Defaults
No match interface is specified by default.
19.4.1.5 Examples
Switch# configure terminal
Switch(config)# route-map mymap1 permit 10
Switch(config-route-map)# match interface eth-0-1