3 ip verify source – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 697
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 697 of 855
no ip source maximal binding per-port
number
Specify maximum number of bindings. The range is 0 to 30.
Default
Maximum number is 10.
Command Mode
Global configuration
Usage
Examples
The following example shows how to specify the maximum number of bindings:
Switch(config)# ip source maximal binding per-port 20
Related Commands
35.3 ip verify source
Use the ip verify source interface configuration command on the switch stack or on a standalone
switch to enable IP source guard on an interface. Use the no form of this command to disable IP
source guard.
Command Syntax
ip verify source {ip | ip-mac | ip-mac-vlan}
no ip verify source
ip
Check only IP address.
ip-mac
Check only IP address and MAC address.
ip-mac-vlan
Check IP address, MAC address, and VLAN.
Default
IP source guard is disabled on interfaces.
Command Mode
Interface configuration
Usage
When IP source guard is enabled on an access port, the ip-mac-vlan keyword is equivalent to the
ip-mac keyword.
Examples