7 mpls map-route – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 524
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 524 of 855
26.7 mpls map-route
Use this command to specify one FEC mapped to a FTN entry.
Command Syntax
mpls map-route { A.B.C.D/M | A.B.C.D M.M.M.M } N.N.N.N/M
Syntax Description
A.B.C.D/M
IPv4 prefix to be mapped.
A.B.C.D
M.M.M.M
IPv4 prefix to be mapped.
N.N.N.N/M
FEC for route to be mapped to.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls map-route command is used to specify one FEC mapped to
a FTN entry:
Switch# configure terminal
Switch(config)# mpls map-route 100.100.100.0/24 200.200.200.0/24
Related Commands
no mpls map-route
Advertising