CANOGA PERKINS CanogaOS Command Reference - Manual (Page 537)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 537 of 855
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls statistics all command is used to display all statistics
information:
Switch# show mpls statistics all
Input : 5 packets, 610 bytes
Output : 0 packets, 0 bytes
In the following example, the show mpls statistics ilm command is used to display MPLS ILM
statistics information:
Switch# show mpls statistics ilm
Label Packets Bytes
1024 0 0
1025 5 610
1026 0 0
Related Commands
show mpls ftn-forwarding
show mpls ilm-forwarding
show mpls l2-circuit
show mpls vpls
show mpls vrf-table
26.21 show mpls
Use this command to display main information about MPLS.
Comm a nd Syntax
show mpls
Syntax description
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls command is used to display main information about