CANOGA PERKINS CanogaOS Command Reference - Manual (Page 91)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 91 of 855
This example shows how to display detailed information of a specified channel group:
Switch# show channel-group 1 detail
Group state = L2
Ports: 2 Maxports = 8
Number of ports in bundle: 2 Max Channel-groups = 255
Standby port = NULL
Protocol: LACP
Ports in the group:
-------------------
Port: eth-0-11
------------
Port state = Up In-Bndl
Channel number = 1 Protocol = LACP Channel-gorup = agg1
Port index = 90 Mode = Active
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
eth-0-11 FA bndl 32768 1 1 0x5a 0x3f
Partner's information:
LACP port Admin Oper Port Port
Port Flags Priority Dev ID key Key Number State
eth-0-11 FA 32768 ca9c.e21d.a301 0 1 0x56 0x3f
Port: eth-0-12
------------
Port state = Up In-Bndl