CANOGA PERKINS CanogaOS Command Reference - Manual (Page 139)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 139 of 855
the bridge becoming root.
Command Syntax
spanning-tree port-priority priority
no spanning-tree priority
priority The priority to be assigned to the group.
Command Mode
Interface mode
Default
The default priority is 1.
Usage
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree port-priority 240
Related Commands
7.14 spanning-tree pathcost-standard
Use this command to set the path cost standard associated with the default bridge-group. Use the no
parameter with this command to set to default value.
Command Syntax
spanning-tree pathcost-standard {dot1d-1998 | dot1t}
no spanning-tree pathcost-standard
dot1d-1998 IEEE 802.1D-1998 standard.
dot1t IEEE 802.1T standard.
Command Mode
Global configuration
Default
The default pathcost-standard is dot1t
Usage
Examples