CANOGA PERKINS CanogaOS Command Reference - Manual (Page 474)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 474 of 855
25.15 debug ldp tsm
Use this command to write trunk state machine specific information to the output.
Note:
On using a debug command, the router continues to generate an output until the
no parameter is used with the command. The debug output and system error
messages are written on the virtual terminal. Use the log file or log syslog
command in configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp tsm
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp tsm command is used to write trunk state machine
specific information to the output:
Switch# debug ldp tsm
Related Commands
debug ldp fsm
debug ldp packet