24 show snmp-server version, 25 show snmp-server view – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 846
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 846 of 855
Related Commands
44.24 show snmp-server version
To display the supported version of SNMP, use the show snmp-server version command in
privileged EXEC mode.
Command Syntax
show snmp-server usm-user
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show snmp-server usm-user command:
Switch# show snmp-server usm-user user1
EnginedID: 01234567890123456789
User Name: user1
Auth Protocol:
priv Protocol:
Storage Type: nonvolatile
Row status: active
Related Commands
44.25 show snmp-server view
To display the family name, storage type, and status of a Simple Network Management Protocol
(SNMP) configuration and associated MIB, use the show snmp-server view command in privileged
EXEC mode.
Command Syntax
show snmp-server view
Command Mode
Privileged EXEC