CANOGA PERKINS CanogaOS Command Reference - Manual (Page 465)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 465 of 855
25.9 debug ldp dsm
Use this command to write Downstream state machine specific information to the output.
Note:
On using a debug command, the router continues to generate an output until the
no parameter is used with the command. The debug output and system error
messages are written on the virtual terminal. Use the log file or log syslog
command in configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp dsm
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp dsm command is used to write Downstream state
machine specific information to the output:
Switch# debug ldp dsm
Related Commands
debug ldp fsm
debug ldp packet