22 spanning-tree restricted-tcn, 23 spanning-tree restricted-role – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 145
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 145 of 855
7.22 spanning-tree restricted-tcn
Use this command to set the restricted TCN value of the port to TRUE. Use the no parameter with this
command to set the restricted TCN value of the port to FALSE.
Command Syntax
spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Command Mode
Interface mode
Default
The default restricted TCN value is FALSE.
Usage
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree restricted-tcn
Related Commands
7.23 spanning-tree restricted-role
Use this command to set the restricted-role value of the port to TRUE. Use the no parameter with this
command to set the restricted-role value of the port to FALSE.
Command Syntax
spanning-tree restricted-role
no spanning-tree restricted-role
Command Mode
Interface mode
Default
The default restricted-role value is FALSE.
Usage