CANOGA PERKINS CanogaOS Command Reference - Manual (Page 490)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 490 of 855
25.31 router ldp
This command is used to enter the LDP specific command-line mode in which global attributes for
the LDP process can be set. Without this command, the LSR does not perform any LDP operations,
such as sending hello packets.
Command Syntax
router ldp
Syntax description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the router ldp command is used to enter the LDP specific command-line
mode in which global attributes for the LDP process can be set:
Switch# configure router
Switch(config)# router ldp
Switch(config-router)#
Related Commands