7 configuring a rmep archive hold time – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 192
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 192 of 855
The default value of bridge maximum age is 20 seconds.
Usage
This command is used to Create a local MEP.
Examples
Switch#configure terminal
Switch(config)#spanning-tree max-age 12
Related Commands
10.7 Configuring a RMEP archive hold time
Use this command to configure the number of minutes that data from a missing remote maintenance end
point (mep) is kept before it is purged.
Command Syntax
ethernet cfm mep archive-hold-time minutes
Command Mode
Configure mode
Default
The default is 5 minutes. The value in the range 1 to 65535 minutes.
Usage
None
Examples
Switch#configure terminal
Switch(config)# ethernet cfm mep hold-time 60
Related Commands
10.8 Configure per MA continuity check (cc) parameters
Use the command to define continuity check parameters for an MA.