CANOGA PERKINS CanogaOS Command Reference - Manual (Page 392)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 392 of 855
19.21.1.5 Examples
Switch# configure terminal
Switch(config)# route-map mymap permit 3
Switch(config-route-map)# set ip next-hop 10.10.0.67
19.21.1.6 Related Commands
19.22 set local-preference
Use this command to set the specified local-preference value.
Use the no parameter with this command to turn off the setting.
Use this command to set the local-preference value of the routes
Note:
This command is valid for BGP only.
19.22.1.1 Command Syntax
set local-preference LOCAL-PREFERENCE
no set local-preference
19.22.1.2 Syntax Description
LOCAL-PREFERENCE <0-4294967295> Species the preference value.
19.22.1.3 Command Mode
Route-map mode
19.22.1.4 Defaults
No set local-preference is specified by default.
19.22.1.5 Examples
Switch# configure terminal
Switch(config)# route-map mymap permit 3
Switch(config-route-map)# set local-preference 100