50 show running-config class-map – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 658
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 658 of 855
Privileged EXEC
Usage
This command is used to show current interface’s policy-map configuration.
Examples
Switch# show policy-map interface eth-0-1
INPUT-POLICY-MAP-NAME: p-1
CLASS-MAP-NAME: cm1
match access-group: acl
OUTPUT-POLICY-MAP-NAME: plc_map
CLASS-MAP-NAME: cmp1
trust: cos
CIR 5000 kbps, CBS 40000 bytes, PBS 50000 bytes, color aware mode, drop color is red
Switch#
Related Commands
None
32.50 show running-config class-map
Use this command to show running-config class-map information.
Command Syntax
show running-config class-map
Command Mode
Privileged EXEC
Usage
This command is used to show running-config class-map information.
Examples
Switch# show running-config class-map
class-map we
!
Switch#
Related Commands
None