18 show ip vrf – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 551
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 551 of 855
Command Mode
Privileged Exec mode
Usage
Switch@vpc1# show ip bgp vpnv4 all
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:1 (VRF_A)
*>i 10.20.1.0/24 10.20.0.1 0 100 0 ?
*> 10.10.1.0/24 10.10.0.1 0 0 65000 ?
Switch@vpc1# show ip bgp vpnv4 all tags
Network Next Hop In tag/Out tag
Route Distinguisher: 100:1 (VRF_A)
*>i 10.20.1.0/24 10.20.0.1 notag/16
*> 10.10.1.0/24 10.10.0.1 16(eth1)/aggregate(VRF_A)
Related Commands
show ip route vrf
27.18 show ip vrf
Use this command to display the routing information of the VRF.
Command Syntax
show ip vrf (VRF-NAME)
VRF-NAME a name used to identify a VRF.
Command Mode
Privileged Exec mode and Exec mode
Usage
This command shows VRF related information, such as interface, Route Distinguisher, Route-target, etc.
Examples
Switch# show ip vrf VRF_A
VRF VRF_A; (table=1)
Related Commands
show ip route vrf