9 mpls enable-all-interfaces, 10 mpls disable-all-interfaces – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 526
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 526 of 855
26.9 mpls enable-all-interfaces
Use this command to enable all the L3 interfaces’ label switch function.
Command Syntax
mpls enable-all-interfaces
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
Label switch function is disabled.
Examples
In the following example, the mpls enable-all-interfaces command is used to enable all the L3
interfaces’ label switch function:
Switch# configure terminal
Switch(config)# mpls enable-all-interfaces
Related Commands
mpls disable-all-interfaces
26.10 mpls disable-all-interfaces
Use this command to disable all the L3 interfaces’ label switch function.