CANOGA PERKINS CanogaOS Command Reference - Manual (Page 197)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 197 of 855
1) For size, enter the cache size in number of entries. The range is from 1 to 65535; the default is100
entries.
2) For hold-time, enter the maximum cache hold time in minutes. The range is from 1 to 65535
minutes; the default is 5 minutes.
3)
Examples
Switch#configure terminal
Switch(config)#
ethernet cfm linktrace cache
Switch(config)# ethernet cfm linktrace cache size 100
Switch(config)# ethernet cfm linktrace cache hold-time 60
Related Commands
10.14 Configuring mip ccm fdb hold time
Use this command to configure the mip ccm fdb hold time.
Command Syntax
ethernet cfm mip fdb hold-time <60-65535>
Command Mode
Configure mode
Default
The default is 60 minutes. The value in the range 60 to 65535 minutes.
Usage
This command is used to configure the mip ccm fdb hold time
Examples
Switch#configure terminal
Switch(config)#
ethernet cfm mip ccm-database hold-time 1000
Related Commands