78 show debugging bgp, 79 show ip bgp – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 331
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 331 of 855
Usage
The router bgp command enables a BGP routing process.
Examples
Switch# configure terminal
Switch(config)# router bgp 12
Switch(config-router)#
16.78 show debugging bgp
Use this command to display the BGP debugging option set.
Command Syntax
show debugging bgp
Command Mode
Privileged Exec mode
Examples
Switch# show debugging bgp
16.79 show ip bgp
Use this command to display BGP network information.
Command Syntax
show ip bgp(IPADDRESS)
show ip bgp ipv4 PREFIX (IPADDRESS)
IPADDRESS = A.B.C.D|A.B.C.D/M Specifies the address and length.
ipv4 Specifies the address family. The type of address family determines the routing table that is
displayed.
PREFIX = multicast|unicast
unicast Specifies a IPv4 unicast address family. This is the default option.
multicast Specifies a IPv4 multicast address family.
Command Mode
Privileged Exec mode and Exec mode
Examples
Switch# show ip bgp 10.10.1.34/24