CANOGA PERKINS CanogaOS Command Reference - Manual (Page 588)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 588 of 855
29.2 no mpls l2-circuit
Use this command to remove an instance of MPLS Layer 2 Virtual Circuit.
Note:
If remove an instance of MPLS Layer 2 Virtual Circuit, the VC fib for the PW
will deleted.
Command Syntax
no mpls l2-circuit NAME
Syntax Description
NAME Identifying string for MPLS Layer-2 Virtual Circuit.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls l2-circuit command is used to remove an instance of
MPLS Layer 2 Virtual Circuit:
Switch# configure terminal
Switch(config)# no mpls l2-circuit pw1
Related Commands
mpls l2-circuit