36 show ntp key – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 768
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 768 of 855
Command Syntax
show ntp association
Command Mode
Privileged EXEC
Usage
Detailed descriptions of the information displayed by this command can be found in the NTP
specification (RFC 1305).
Examples
The following example shows the status of NTP associations:
Switch# show ntp associations
Current NTP associations:
remote refid st when poll reach delay offset disp
=================================================================
2.2.2.2 0.0.0.0 16 - 64 0 0.000 0.000 3992.17
* synchronized, + candidate, # selected, x falsetick, . excess, - outlyer
Related Commands
show ntp status
40.36 show ntp key
To show the NTP keys, use the show ntp key command in privileged EXEC mode.
Command Syntax
show ntp key
Command Mode
Privileged EXEC
Usage
Use this command to display the NTP keys.
Examples
The following example shows the keys of NTP:
Switch# show ntp key
Current NTP key configuration:
============================================================
1 abcd