CANOGA PERKINS CanogaOS Command Reference - Manual (Page 494)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 494 of 855
25.35 show ldp adjacency
Use this command to display all the adjacencies for the current LSR.
Command Syntax
show ldp adjacency
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Examples
In the following example, the show ldp adjacency command is used to display all the adjacencies
for the current LSR:
Switch # show ldp adjacency
IP Address Interface Name Holdtime LDP ID
192.168.3.5 eth1 15 10.10.0.18:0
192.168.4.5 eth2 15 10.10.0.18:0
Related Commands