CANOGA PERKINS CanogaOS Command Reference - Manual (Page 508)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 508 of 855
25.45 show ldp upstream
Use this command to display the status of all upstream sessions and label information exchanged.
Command Syntax
show ldp upstream
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp upstream command is used to display the status of all
upstream sessions and label information exchanged:
Switch# show ldp upstream
Session peer 192.168.11.50:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.11.50
Attr:
Session peer 192.168.13.60:
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.13.60
Attr:
None
Upstream state: Established Label: impl-null RequestID: 0 Peer: 192.168.13.60
Attr:
None