6 more – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 730
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 730 of 855
-rw-r--r-- 1 6886 Jul 29 23:59 syslog.1.gz
63.0M bytes total (30.4M bytes free)
Switch#
Related Commands
dir
39.6 more
To display the contents of a file, use the more command in EXEC mode.
Command Syntax
more [flash:/directory-name/]file-name
flash: The
flash
system
directory-name The directory in flash:
file-name
The file name.
Command Mode
EXEC
Usage
The system can only display a file in ASCII format.
Examples
The following partial sample output displays the configuration file named startup-config in flash:
Switch# more flash:/startup-config.conf
!
no service password-encryption
!
!
hostname Switch
!
!
!
diagnostic bootup level minimal
management ip address 192.168.0.1/24
!
Related Commands
dir
ls