CANOGA PERKINS CanogaOS Command Reference - Manual (Page 360)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 360 of 855
18.8.1.1 Command Syntax
show ip sla monitor schedule (entrynumber)
18.8.1.2 Syntax Description
entrynumber Entry number is used to identify ip sla monitor entry, its
range is from 1 to 500;
18.8.1.3 Command Mode
Exec mode
18.8.1.4 Defaults
none
18.8.1.5 Examples
In the following example, the show ip sla monitor command is used to show ip sla monitor
entries:
Switch#show ip sla monitor
Entry 1
Type : Echo
Admin state : Enable
Destination address : 192.168.0.1
Frequency : 3 seconds
Timeout : 2 seconds
Threshold : 1seconds
Running Frequency : 3 seconds
Vrf : vpn1
Return code : OK
18.8.1.6 Related Commands
Ip sla monitor;
18.9 TRACK INTERFACE LINKSTATE
Create a track object and track the state of an interface, use the track interface linkstate to
command in global configuration mode. To remove a track, use the no form of this command.
18.9.1.1 Command Syntax
track objectid interface IFNAME linkstate
no track objectid