28 show mac address-table, 29 show port-security address-table – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 79
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 79 of 855
4.28 show mac address-table
Use this command to show mac address-table.
Command Syntax
show mac address-table {dynamic |static |multicast} [address address |interface interface |vlan
vlan]
dynamic: show the entries learned dynamically
static: show the entries configured statically
multicast: show the multicast mac entries.
address: show the entries specified mac address
interface: show the entries specified interface name
vlan: show the entries specified vlan id.
Command Mode
EXEC
Usage
None
Examples
This example shows mac address-table on the Switch.
Switch# show mac address-table static
This example shows mac dynamic address-table on the interface eth-0-1.
Switch# show mac address-table dynamic interface eth-0-1
Related Commands
clear mac address-table
4.29 show port-security address-table
Use this command to show port-security mac address-table.
Command Syntax
show port-security address-table
Command Mode
EXEC