CANOGA PERKINS CanogaOS Command Reference - Manual (Page 517)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 517 of 855
25.52 show ldp vpls
Use this command to display information about all VPLS instances. Specify the VPLS ID to
display information about a specific VPLS instance.
Command Syntax
show ldp vpls [detail | VPLS_ID]
Syntax description
detail Show detailed information
VPLS_ID Specifies the VPLS identifier, the range is 1 to 4294967295.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp vpls command is used to display information about all
VPLS instances:
Switch# show ldp vpls
VPLS-ID Peer Address State Type Label-Sent Label-Rcvd
1 192.168.0.80 Up vpls 16 640
1 192.168.0.90 Up vpls 18 642
2 192.168.0.80 Up vpls 19 641
2 192.168.0.90 Up vpls 17 643
Related Commands