13 trust dscp, 14 trust ip-prec – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 635
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 635 of 855
Interface configuration
Usage
None
Examples
This example shows how to configure default cos value to 5.
Switch(config-if)# cos 5
This example shows how to cancel this setting.
Switch(config-if)# no cos
Related Commands
None
32.13 trust dscp
Use this command to configure the port trust state to dscp to classify ingress packets with the packet
DSCP values.
Command Syntax
trust dscp
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure the port trust state to dscp.
Switch(config-if)# trust dscp
Related Commands
no trust
32.14 trust ip-prec
Use this command to configure the port trust state to ip-prec to classify ingress packets with the packet
IP-PREC values.
Command Syntax
trust ip-prec