34 show ntp, 35 show ntp association – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 767
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 767 of 855
Switch(config)# ntp authentication enable
Switch(config)# ntp key 42 aNiceKey
Switch(config)# ntp trustedkey 42
Related Commands
show ntp
ntp key
40.34 show ntp
To display the NTP configurations, use the show ntp command in privileged EXEC mode.
Command Syntax
show ntp
Command Mode
Privileged EXEC
Usage
Use this command to display the NTP configurations.
Examples
The following example shows the configuration of NTP:
Switch# show ntp
Current NTP configuration:
============================================================
NTP access control list:
Unicast peer:
1.1.1.1
Unicast server:
2.2.2.2
Local reference clock:
Related Commands
ntp server
ntp peer
40.35 show ntp association
To show the status of Network Time Protocol (NTP) associations, use the show ntp associations
command in privileged EXEC mode.