8 show mvr group, 9 show mvr group static – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 436
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 436 of 855
Port Type VLAN Status
eth-0-1 source 2 ACTIVE
eth-0-2 receiver 3 ACTIVE
Related Commands
None
23.8 show mvr group
Use this command to show mvr group learned from receiver port.
Command Syntax
show mvr groups [vlan vlan [A.B.C.D] ]
vlan: show mvr groups in a specified vlan
Vlan: <1-4094> vlan id
A.B.C.D: multicast group address
Command Mode
Privileged EXEC
Usage
Show mvr group information learned from receiver port
Examples
Switch#show mvr groups
VLAN Interface Group-Address Uptime Expires-time
2
eth-0-1
238.255.0.1 00:01:00 00:04:00
Related Commands
None
23.9 show mvr group static
Use this command to show mvr global static groups.
Command Syntax
show mvr groups static global
Command Mode
Privileged EXEC