CANOGA PERKINS CanogaOS Command Reference - Manual (Page 47)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 47 of 855
4094.
Switch(config)# vlan database
Switch(config-vlan)#
The supported commands can vary depending on the version of software in use. To view a comprehensive
list of commands, enter a question mark (?) at the prompt:
Switch(config-vlan)# ?
To return to privileged EXEC mode, enter the abort VLAN configuration command to abandon the
proposed database. Otherwise, enter exit to implement the proposed new VLAN database and to return to
privileged EXEC mode. When you enter exit or apply, the configuration is saved in the VLAN database;
configuration from VLAN configuration mode cannot be saved in the switch configuration file.
2.6 Line Configuration Mode
Line configuration commands modify the operation of a terminal line. Line configuration commands
always follow a line command, which defines a line number. Use these commands to change terminal
parameter settings line-by-line or for a range of lines.
Use the line vty line_number [ending_line_number] command to enter line configuration mode. The new
prompt means line configuration mode. The following example shows how to enter line configuration
mode for virtual terminal line 7:
Switch(config)# line vty 0 7
The supported commands can vary depending on the version of software in use. To view a comprehensive
list of commands, enter a question mark (?) at the prompt:
Switch(config-line)# ?
To exit line configuration mode and to return to global configuration mode, use the exit command. To exit
line configuration mode and to return to privileged EXEC mode, enter the end command, or press Ctrl-Z.