CANOGA PERKINS CanogaOS Command Reference - Manual (Page 382)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 382 of 855
19.13 match tag
Use this command to match the specified tag value.
Use the no parameter with this command to turn off the declaration.
Use the match tag command to match the specified tag value.
Note:
This command is valid for RIP and OSPF only.
19.13.1.1 Command Syntax
match tag TAG
no match tag
19.13.1.2 Syntax Description
TAG <0-4294967295> Specifies the tag value.
19.13.1.3 Command Mode
Route-map mode
19.13.1.4 Defaults
No match tag is specified by default.
19.13.1.5 Examples
Switch# configure terminal
Switch(config)# route-map mymap1 permit 10
Switch(config-route-map)# match tag 100
19.13.1.6 Related Commands
match metric
match route-type external