12 ip igmp version – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 416
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 416 of 855
2 seconds
Usage
None
Examples
This example shows how to set the igmp querier robustness variable value to 6.
Switch(config-if)#ip igmp robustness-variable 5
This example shows how to return the igmp querier robustness variable value to default value.
Switch(config-if)#no ip igmp robustness-variable
Related Commands
show ip igmp interface
21.12 ip igmp version
Use this command to set the igmp version on interface.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp version <1-2>
no ip igmp version
<1-2>: the igmp version on the interface
Defaults
2
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to set the igmp version 1 on the interface.
Switch(config-if)# ip igmp version 1
This example shows how to return the igmp version to default value.
Switch(config-if)# no ip igmp version
Related Commands
show ip igmp groups